One, the introduction of uv disinfection lamp that ultraviolet germicidal lamp
, it is to use mercury lamp shoot the ultraviolet sterilization lamps and lanterns, mainly in the form of low pressure disinfection.
In addition to medical treatment, public buildings, food processing, it is also widely used in our life, such as application in disinfector, also can disinfect the household environment.
According to the national standard, it has 8000 hours of life expectancy.
Second, switch correct method of use: the applicable scope of the ultraviolet lamp is used for indoor air and on the surface of the object and disinfection of water and other liquids.
Uv light is to eliminate pathogenic microorganism in the external environment, cut off the spread of infectious diseases, disrupt the spread of disease, so as to achieve the purpose of protection of human health.
Ultraviolet disinfection lamp, it is mainly used for air disinfection.
1, ride height.
From the ground should be vertical suspension, 2-2.
2, the range of , sterilization is c wave ultraviolet light from the inside line, its wavelength range of 200-270 nm, sterilization of center wavelength for 253.
In the case of uv intensity and irradiation time is enough, can kill all the microorganisms.
However, ultraviolet penetration is very weak, the irradiation intensity and is inversely proportional to the square of the distance, and only in the irradiation on the surface of the can play a role of sterilization.
At present our country is now the main production include these: power in 15 w, 20 w, 30 w, 40 w currently we use most is 30 w uv lamp, requirement is per cubic meter area of 1.
3, each uv lamp cumulative time is 1000 hours, more than 1000 hours, should be timely replacement of the new.
The new change to indicate the change of time, and the accumulated use of time.
4, , in use process should be kept clean on the surface of the ultraviolet lamp, generally every two weeks with alcohol sponge polishing the try again, found a gray layer, oil tube surface, shall, from time to time, polishing the try.
5, ultraviolet light disinfection time should be 30 to 60 minutes at a time.
Ultraviolet ray sterilizing lamp and the biggest difference between the ordinary lamp on the tubes: (
The lamp is transparent, and ordinary lamp is coated phosphor coating (
Lights usually print reminder: please be careful to use, pay attention to skin and eyes from ultraviolet (uv) light practice, are usually advised of power switch from ordinary light control switch, and make clear warning on so be to grasp the method of problems and use, correct installation and use of ultraviolet lamp, to eliminate or reduce the influence factors of ultraviolet light disinfection.
Three, matters needing attention when using: (
With ultraviolet light disinfection of indoor air, the room should keep clean and dry, reduce dust and water mist, the temperature below 20 ℃ or higher than 40 ℃, relative humidity greater than 60% should be appropriately extended exposure time.
In use process, should be kept clean on the surface of the ultraviolet lamp, usually once every two weeks, with alcohol cotton ball wiping, found the tube surface dust, grease, shall, from time to time to wipe.
Shall not make ultraviolet (uv) light irradiation to the people, lest cause damage.
Surfaces with ultraviolet disinfection, should make light surface by direct exposure to the sun's ultraviolet rays, and should achieve enough exposure dose.
If the operator must be on the scene, please be sure to wear LUV -
40 uv protection mask!
Above is the switch use method and matters needing attention, don't know what you know about !
If you have questions can feel free to call our service hotline.
Whenever the question of ultraviolet light suppliers
uv light bulb manufacturers is raised, one comes across the term ''.
Guangdong Liangyueliang Photoelectric Technology will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.
ultraviolet light suppliers can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.