uv sterilizer lamp
is widely used in people's life, a variety of products on the market, but people use of method or some don't understand, improper use can bring some trouble to life, to introduce the perimeter sterilizing lamp under the usage of 1, air disinfection disinfection method: please close the doors and Windows when using, should keep my room clean and dry, since the light is 5 -
Seven minutes after the start time, effective distance is less than 2 meters, sterilization time is 30 - every time
If after turn off the lights need to be open, intermittent 3 -
4 minutes to open;
It is strictly prohibited in the process of ultraviolet lamp irradiation personnel enter indoor, can produce ozone, ultraviolet disinfection process after the irradiation should open a window ventilated;
Must be entered, should first stop irradiation.
2, items, surface disinfection: to spread out the item or hang, make it fully exposed to direct illuminate light, ultraviolet light cannot penetrate the object;
Surface disinfection, tube surfaces contaminated by distance should not be more than 1 m, in ultraviolet lamp radiation intensity meets the requirements, under the condition of irradiation time shall not be less than 30 min.
High strength, low ozone ultraviolet germicidal lamp
, illuminate 30 min ~ 60 min in effective range.
Note 01 keep clean tube in use process, dust on the surface of the tube will affect disinfection effect, so should pay attention to clean and environmental conditions on the surface of the tube, with 95% or 75% alcohol to clean once a week, recorded in a timely manner, and found the tube surface dust, grease, shall, from time to time to wipe.
02 disinfection conditions appropriate temperature: 20 ~ 40 ℃ appropriate moderate: 40 ~ 60% temperature use , should keep the environment clean, cannot have dust in the air and water spray, when indoor temperature below 20 degrees Celsius or more than 50%, the relative humidity should be prolonged exposure;
After scrubbing should stay on the ground after the ground dry again ultraviolet light disinfection.
03 use time should do well in the lamp use registration record, record the date of disinfection, sterilization time, total time, wipe arranged, tube monitoring situation, executor signature, etc;
The service life of the is 1000 hours, more than 1000 hours to change the bulb.
04 regular monitoring intensity measure, open the uv lamp after 5 minutes, the indicator card from uv lamp in vertical 1 m below the central place, will have the design side toward the light tube, after irradiation for 1 minute, the ultraviolet ray in design of photosensitive color piece with ivory into different levels of lavender, with the standard color piece contrast, can be determined whether ultraviolet lamp irradiation intensity values meet the use requirements.
The above is to introduce the method of use of exterior disinfection lamp, hope to be of help!
As we have known for quite some time, the success of LiangYueLiang in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
Guangdong Liangyueliang Photoelectric Technology endeavors to be valued as an industry leader in client satisfaction, sales growth, product performance, financial strength and profitability.
There have been conclusive evidence on 's role in uv light bulb manufacturers
and uv light bulb manufacturers.
It is essential to know the basic functioning of to help us understand the components and the part they play.